Could you explain what the parameter FLC1 means in Tesys T configuration.
FLC1 is used to set the value of nominal current regarding the range of TesysT.
For example if we have a TesysT range 8 amps (LTMR08***) and a motor 2 amps
nominal current we set the FLC1 to 25% because the current of the motor in this
example is the quarter of the full load current here 8amps. When we put 25% in
FLC1 this is means that the current in the register 466 (value of current in percent)
take the value of 100% when you reach 25% of the range of TesysT.
The purpose of FLC1 is to set the level of current where you are at the nominal
current regarding the range of the TesysT.