Technical FAQs

Ask a Question

Is it possible to use 3 different control channels 1) Comm. 2) HMI (Graphic Keypad) 3) Terminal for controlling the Altivar 71

The 3 different control channels 1) Communication 2) HMI (Graphic Keypad)  and 3) Terminal for controlling the Altivar 71 Drive can be achieved by way of drive parameter programming. 

Example Programming:

CHCF = SIM
FR1 = Modbus
RFC = LIx (to switch from FR1 to FR2).
FR2 = Term (Terminal)
Fx key assignment = T/K (to switch between the actual channel to the HMI)

Note:
Only one channel can control the drive at any given point. Control can be switched between one control channel to other.
Was this helpful?
What can we do to improve the information ?